When you are mining or building tunnels, the work is a lot similar. They are both done underground and the workflow is similar. You drill yourself deeper and deeper and remove the broken clay, rock and debris via dump trucks. The equipment that will be involved is some form of drill the rock when you hit rock, then an excavator, a compact mine loader and then dump truck. The dump truck is often the articulated type as the space is limited. As you dig deeper and constantly remove material to the surface, you will be able to extend the tunnel or the mine.

The whole logistics is often a challenge as the space is limited and you still need to have the right equipment in place. You also need space so that the loader can fill the dump truck with material. The conditions are as tough as they get especially for the tires, while driving on sharp rocks and debris. The tire selection is critical, where the correct decision can increase your productivity and reduce any downtime, while a bad decision can turn a project to run over budget and cause delays.

All the tires on the equipment that work in the mines or tunnels should have proper mining tires. There are special excavator tires, loader tires and for special drill rig tires. Make sure that you select the correct tire and dimension for the equipment that you intend to use the tire on. Since the decision is of utter importance, you will need to have a good tire selection process. Using the technical tire manual will help you make the correct decision based on the equipment and for the conditions that are in play.

Once you have the correct tires for the equipment, so that they are able to work in these tough conditions. You will need to make sure that the tires will stay durable and have a long service life with minimum downtime. To achieve this you will need to adhere to strict tire maintenance protocols. If you have a good tire selection process, but still suffer from high degree of unscheduled downtime, then you will need to see over your tire maintenance routines. The tire maintenance is in place to detect any problems that might arise from wear and tear during usage.

If you detect any problems related to the tires, you will need to take it serious and make a proper decision if the tires needs to be replaced or if they can be repaired or if they can continue to operate. You also need to make sure to check the tire pressure and monitor the tread depth so that you know when the tires are worn out and need to be replaced. If all this is working correctly, you should have a problem free work environment with good productivity and without delays.

For more information regarding mining tires for the toughest conditions, visit: https://www.nokianheavytyres.com/