Do you need to buy wheels for your Holden Commodore? Aesthetics will be important, but there are other factors to consider while buying Commodore wheels. This article will provide you with some tips that you can follow while buying wheels for your car.

1. Consider The Width

The width of a wheel should typically be a couple of inches narrower than the tire. A narrow wheel is better at keeping the air pressure on the tires low. But choosing a wheel that is too narrow can crown the tire. It can lead to degradation in the centre of the tread.  

2. Check The Diameter

Wheels with large diameters are quite popular these days. But you should know that wheels with large diameters are quite expensive. Several options are available for wheels with a diameter of 17 inches. You will have a broad range of tyre options for the 17-inch wheels. They are also suitable for most brake packages. It is better when the wheel diameter is less than half of the tyre diameter. 

3. Determine The Bolt Pattern

The bolt pattern on the wheels should match with the axles. The bolt pattern is indicated by two numbers. The first number states the number of lugs. The second number gives an idea about the diameter of the bolt circle. 

4. Check The Load Rating Of Your Wheels

Do you always look for the load rating of your tires before hiring them? You will be surprised to know that even wheels have a specific load rating. It often depends upon bolt pattern and wheel construction. Wheels made from steel will have a lower load rating than cast aluminium ones. On the other hand, the highest load rating can be found in forged wheels. You should know that a wheel having a big bolt circle and more lug nuts will have a high load rating. Despite the construction material, such wheels will have a higher load rating. It happens because of the way the load gets distributed. 

5. Analyse The Bead Seat

You must know that the bead seat keeps the tire seated using air pressure. A wider and taller bead seat is recommended to maintain low air pressure. It prevents the tire from coming out of the wheels. They contain a mechanical clamp with bolts to keep the tire from coming off. The bolts are usually present on the outside bead.

6. Center Bore

It is the hole in the centre of a wheel. The centre bore will be bigger if the bolt pattern is larger. A bigger centre bore will ensure that the wheels fit on the locking hubs and axles. If your wheels are hub-centric, the centre bore will determine the positioning of the wheel on the axle. In lug-centric wheels, lug nuts are used to keep the position of the wheel intact. 

Closing Thoughts

You should focus on these factors to ensure that you can buy appropriate wheels for your car. Hope the article has helped you gather the importance of these parts in a wheel.